Low
Pressure CP-Series Pumps
Corken CP-Series Coro-Vane®
pumps produce a maximum differential pressure of 125 psig (8.6
bar g). Corken manufactures five sizes of Coro-Vane pumps, ranging
from 20 gpm to 400 gpm (4.5–90.9 m3/hr). These pumps can
handle discharge pressures up to 200 psig (13.8 bar g). They
are designed for light liquids with viscosities below 10,000
SSU.
The
pump housing and rotors are constructed of iron for extra strength
and long life. The sliding vanes are self-adjusting which allows
for longer life and higher efficiencies throughout the life
of the pump. The pump series is inexpensive and simple to repair.
The pump design includes removable pump casing cams (liners)
and reversible/replaceable side plates which when worn can be
replaced in minutes. The seal and bearings can be replaced in
minutes by simply removing four bolts.
Corken offers these pumps with v-belt or gear reduced direct-drive
mounting options.
Product
Features
Compact
size
Exceptional in light liquid transfer
High pumping efficiencies throughout life of pump
Can handle small amounts of vapor
Suction lift
Vanes are self adjusting
Modularity throughout pump line
Years of service
Product Options
Hydraulic drive
Integral gear
NPT or ANSI flanged
Internal relief valve
Long Life and Ease of Maintenance
High
Pressure
CD-Series
Pumps
CP-Series Pumps Corken CD-Series Coro-Vane®
pumps produce a maximum differential pressure of 125 psig (8.6bar
g). Corken manufactures four sizes of Coro-Vane pumps, ranging
from 20 to 400 gpm (4.5–90.9m3/hr). These pumps can handle
discharge pressures up to 400 psig (27.6 bar g). They are
designed
for light liquids with viscosities below 10,000 SSU. The pump
housing and rotors are constructed of ductile iron for extra
strength and long life. The sliding vanes are self-adjusting
which allows for longer life and higher efficiencies throughout
the life of the pump. The pump series is inexpensive and simple
to repair. The pump design includes removable pump casing
cams
(liners) and reversible/replaceable side plates which when
worn can be replaced in minutes. The seal and bearings can
be replaced
in minutes by simply removing four bolts.
Corken offers these pumps with v-belt or gear reduced direct-drive
mounting options.
Product Features
Compact size
Exceptional in light liquid & liquefied gas transfer
High pumping efficiencies throughout life of pump
Can handle small amounts of vapor
Suction lift
Vanes are self adjusting
Modularity throughout pump line
Years of service
Product
Options
Hydraulic drive
Integral gear
NPT or ANSI flanged
Internal relief valve
Long Life and Ease of Maintenance
