Pulsafeeder Eclipse Series Pumps

The Eclipse Series is a line of innovational non-metallic industrial gear pumps designed for optimal performance and simplicity in operation and maintenance. When compared to centrifugal pumps, Eclipse has a smaller installed footprint, lower required horsepower and shipping weight. This means dramatic costs savings throughout the life of the pump.

Eclipse Series pumps are built for use in the harshest industrial environments. Designed to be structurally rugged with corrosion-resistant materials, the Eclipse is an ideal fit for many medium to highly corrosive liquids used in the chemical processing, pulp and paper and water treatment industries.



Features

Corrosion Resistance:
• All wetted components are completely non-metallic.
• Pump housings and gears are made of Engineered Fluoropolymers with excellent corrosion resistance and strength over a broad range of chemicals and temperatures.
• No need for expensive high alloys prone to corrosion damage.

Sealless Design:
• Eclipse Series pumps are magnetically
driven, meaning there is no mechanical seal with contacting seal faces that are prone to wear and leakage.
• Eliminates costly seal flush systems required for double mechanical seals.
• Zero leakage, no emissions of hazardous or regulated chemicals.
• A non-metallic containment can eliminates energy loss and heat rise due to Eddy Current losses common in metallic pumps.

Dry Run Capabilities:
• Capable of up to 30 minutes of dry-run conditions.
• Pump is protected from damage during system upset conditions such as a closed suction valve or empty supply tank.
• The patent pending bearing design promotes constant lubrication during periods of dry run.

Economical, Advanced Design:
Front-Pullout Design All typical wear components can be easily replaced by removing the front cover only. No need to disconnect piping or motor connections. Reduced pump down-time for repair or scheduled maintenance.

Advanced design utilizes a fraction of the parts used in other pump technologies. Fewer parts make it easier to inventory, maintain and service. Patented Housing Insert Transfers wear from center housing to the insert. 100% renewable performance with the change of a KOPKit. KOPkits are designed to guard against unnecessary down time and ensure the highest level of efficient and uninterrupted service. This kit includes the recommended spare parts to maintain as-new hydraulic performance.

Pump and Corrosion Technologies is a master distributor for the Eclipse, holding a large amount of the product in warehouse or inventory.

Eclipse Series

Series 2 General Specifications

Port Size and Type: 1/4" NPT or BSPT

Direction of Rotation: Bi-directional

Theoretical Displacement: 0.02 gal / 100 rev.(0.76 cc / rev.)

Maximum Differential Pressure: 150 psi (10 Bar)

Maximum Allowable Working Pressure: 200 psi (14 Bar)

Maximum Speed: 1750 rpm

Maximum Capacity at 0 psig: 0.4 gpm (1.5 LPM)

Maximum Viscosity: 5,000 cps

Maximum Fluid Temperature: 150ºF (65ºC)

Fluid pH Range: 0-14

Gear Type: External Spur Gear

Bearing Type: Sleeve Bearing Integral Wear Plate

Motor Frame Sizes: NEMA 56C, 143/145TC

Motor Frame Sizes: IEC 63, 80 B14 Flange


Series 5 General Specifications

Port Size and Type: 3/8" NPT or BSPT

Direction of Rotation: Bi-directional

Theoretical Displacement: 0.07 gal / 100 rev. (2.8 cc / rev.)

Maximum Differential Pressure: 150 psi (10 Bar)

Maximum Allowable Working Pressure: 200 psi (14 Bar)

Maximum Speed: 1750 rpm

Maximum Capacity at 0 psig: 1.3 gpm (4.9 LPM)

Maximum Viscosity: 10,000 cps

Maximum Fluid Temperature: 150ºF (65ºC)
Fluid pH Range: 0-14

Gear Type: External Spur Gear

Bearing Type: Sleeve Bearing Integral Wear Plate

Motor Frame Sizes: NEMA 56C, 143/145TC

Motor Frame Sizes: IEC 63, 80 B14 Flange


Series 25 General Specifications

Port Size and Type: 1" ANSI 150# / DIN 20/25 Flanged

Direction of Rotation: Bi-directional

Theoretical Displacement: 0.37 gal / 100 rev.
(14 cc / rev.)

Maximum Differential Pressure: 150 psi (10 Bar)

Maximum Allowable Working Pressure: 200 psi (14 Bar)

Maximum Speed: 1750 rpm

Maximum Capacity at 0 psig: 6.5 gpm (24.6 LPM)

Maximum Viscosity: 10,000 cps

Maximum Fluid Temperature:150ºF (65ºC)

Fluid pH Range: 0-14

Gear Type: External Spur Gear

Bearing Type: Sleeve Bearing Integral Wear Plate

Motor Frame Sizes: NEMA 143/145TC, 182/184TC

Motor Frame Sizes: IEC 100, 112 B14 Flange


Series 75 General Specifications

Port Size and Type: 1.5" ANSI 150# / DIN 30/40 Flanged

Direction of Rotation:Bi-directional

Theoretical Displacement: 1.14 gal / 100 rev.
(43.2 cc / rev.)

Maximum Differential Pressure: 150 psi (10 Bar)

Maximum Allowable Working Pressure: 200 psi (14 Bar)

Maximum Speed: 1750 rpm

Maximum Capacity at 0 psig: 20 gpm (75 LPM)

Maximum Viscosity: 10,000 cps

Maximum Fluid Temperature: 150ºF (65ºC)

Fluid pH Range: 0-14

Gear Type: External Spur Gear

Bearing Type: Sleeve Bearing Integral Wear Plate

Motor Frame Sizes: NEMA 143/145TC, 182/184TC

Motor Frame Sizes: IEC 100, 112 B14 Flange

Markets

• Chemical
  
• Food & Beverage
  
• General Industries
  
• Mining
  
• Petroleum
  
• Pulp & Paper
  
• Power & Energy
  
• Water Treatment
  
• Pharmaceutical
  
• Paints & Dyes
  
• Petrochemical